News

Hardenedsteel is a common type of steel with increased hardness after quenching in machining workshops. There are many types of hardened steel workpieces, and there are many processing difficulties during the processing.The machining of hardened steel involves many different machining conditio

IntroductionAisi 630 steel is a high-strength, heat-treatable alloy that is commonly used in a variety of industries. When it comes time to cut this tough material, you want to make sure you have the right tools for the job. In this article, we'll walk you through some of the best cutting tools

When Processing heat treat d2 steel, pcbn inserts are useful. They improve the quality of the resulting steel by controlling the tempering process. What are pcbn inserts? pcbn inserts are small, cylindrical objects that are inserted into the cooling channel of a heat treat fu

Google Inc. has announced a larger version of its Nexus tablet computer, one that comes closer to competing with Apple's full-sized iPad and other tablets. Here's a look at how the Nexus 10 compares with other tablets with comparable screens.Google Inc.'s Nexus 10 (available Nov. 13):—

If you're in the market for some new inserts for hardened steel, you might be wondering what the best option is. With so many different types and sizes of inserts available, it can be tough to know where to start. But if you're looking for superior quality and durability, you can't go wr

The characteristics of hardened steel that are difficult to machine(1) The main properties of hardened steel are high hardness and strength, and almost no plasticity. When the hardness of hardened steel reaches 50-60hrc, the tensile strength m is 2100-2600mpa, which is a difficult-to-cut material.(2

Reasonable selection of machining tool materials is an important condition for finishing hardened steel.Hardened steel has some characteristics in the cutting process:(1) High strength and hardness(2) High cutting force and high cutting temperature(3) Thecutting edgeis easy to break and

The hardness of quenched steel is generally above 45HRC, the plastic deformation during processing is poor, the cutting resistance is large, and the cutting temperature is high. If the hardness of the tool material is low, the tool will be difficult to cut and easy to wear (especially in inner hole

Most of the quenched steel parts hardness are above HRC58, showing difficult to process. In the past, the grinding process was generally used, but there were problems such as low processing efficiency, the need to add cutting fluid, and environmental pollution. Most factories now use the new car-gri